Product Advantage
Superior Material Performance: Made of 6063-T5 aluminum alloy, it offers a tensile strength of ≥210MPa and a yield strength of ≥170MPa—30% higher than ordinary aluminum profiles. Its excellent thermal conductivity (201W/(m·K)) also makes it suitable for heat dissipation-related applications like LED cooling brackets.
Exceptional Corrosion Resistance: The surface undergoes professional treatment (e.g., 12μm-thick anodizing or polyester powder coating). It can withstand 1000 hours of neutral salt spray testing without rusting, ensuring long-term use in humid or coastal areas.
Precision Dimensional Control: Adopts advanced extrusion molds and CNC calibration technology, with a dimensional tolerance of ±0.1mm. This ensures tight fitting during assembly, reducing gaps between components and improving structural stability.
Versatile Customization: Supports multiple surface finishes (anodized silver, black powder coating, wood grain transfer) and length cutting (customizable from 1m to 6m). It can also be drilled, punched, or grooved according to design drawings, adapting to complex installation scenarios.
Eco-Friendly & Cost-Effective: 100% recyclable without losing material properties, aligning with global low-carbon development goals. Its lightweight (density of 2.7g/cm³) also reduces transportation and installation costs—saving up to 20% of labor and logistics expenses compared to steel profiles.
Technical Parameters
Parameter | Specification | Unit | Test Standard |
Material | 6063-T5 Aluminum Alloy | - | ASTM B221 |
Cross-Sectional Size | 60×60 | mm | GB/T 6892 |
Tensile Strength | ≥210 | MPa | ASTM B557 |
Yield Strength | ≥170 | MPa | ASTM B557 |
Elongation Rate (50mm) | ≥8 | % | ASTM B557 |
Thermal Conductivity | 201 | W/(m·K) | ASTM E1461 |
Surface Finish | Anodizing (10-15μm), Powder Coating (60-80μm) | μm | ASTM B928 |
Density | 2.7 | g/cm³ | ASTM B328 |
Maximum Operating Temperature | -50 ~ 120 | ℃ | GB/T 3194 |
Standard Length | 6000 (Customizable 1000-6000) | mm | Customer Requirement |
Straightness Tolerance | ≤0.5 | mm/m | GB/T 6892 |
Product Uses
1. Solar Energy Systems: Used as a main bracket for solar panels. Its high load-bearing capacity (can withstand wind loads of up to 2.4kPa) and corrosion resistance ensure stable support for solar modules, even in areas with strong winds or heavy snow.
2. Architectural Decoration: Applied to indoor partition frames, ceiling keels, and outdoor awning structures. The anodized or powder-coated surface enhances the building’s aesthetic appeal, while its lightweight property reduces the load on the building’s main structure.
3. Industrial Equipment Frames: Assembled into frames for automated production lines, testing equipment, and display stands. Its precision dimensions allow for modular assembly, making it easy to disassemble and reuse during equipment upgrades.
4. Transportation Accessories: Used in the manufacturing of luggage racks for RVs and cargo compartments for electric vehicles. Its corrosion resistance prevents damage from rainwater, and its lightweight helps improve the vehicle’s energy efficiency.
Product Operate Guide
Preparation: Before installation, check whether the profile’s size, surface finish, and length match the design requirements. Clean the surface with a dry cloth to remove dust or oil stains that may affect adhesion.
Assembly Steps: Use aluminum alloy special bolts (M6-M8) for connection. When drilling holes, ensure the drill bit diameter matches the bolt size to avoid cracking the profile. For outdoor installations, apply waterproof sealant at the connection points to enhance corrosion resistance.
Post-Installation Inspection: Check the flatness of the assembled structure (tolerance ≤1mm/m) and the tightness of bolts (torque recommended: 8-10N·m). Ensure no deformation or scratches on the surface, which may affect performance and appearance.
Maintenance Tips: Regularly clean the surface with neutral detergent and water; avoid using acidic or alkaline cleaners. For outdoor profiles, inspect the surface finish annually—if peeling or rusting is found, repair it with matching paint or coating in time.
FAQ
1. Q: Can the T5 60-60 aluminum profile be used for load-bearing structures like building balconies?
A: Yes, but it needs to be designed according to the actual load (we recommend consulting our structural engineers). For standard balconies (load ≤2.0kN/m²), using this profile with reinforced connectors can meet safety requirements.
2. Q: What is the lead time for customized surface finishes (e.g., wood grain transfer)?
A: For standard finishes (anodizing, basic powder coating), lead time is 5-7 working days. For special finishes like wood grain transfer, it takes 10-12 working days, including sample confirmation and production adjustment.
3. Q: Does the profile come with pre-drilled holes, or do we need to process them on-site?
A: We can provide pre-drilled holes according to your design drawings (free of charge for orders over 500 meters). For small-batch orders, on-site drilling is recommended, and we can provide a matching drill bit as a gift.
4. Q: What is the warranty period for the T5 60-60 aluminum profile?
A: We provide a 10-year warranty for the material and surface finish. If there is quality issues (e.g., corrosion, deformation) caused by product itself within the warranty period, we will provide free replacement.
5. Q: Can you provide certificates for the aluminum profile (e.g., CE, RoHS)?
A: Yes, we have obtained CE, RoHS, and ISO 9001 certifications. We can provide the latest certificate copies upon order confirmation, and also support third-party testing (e.g., SGS) at the customer’s request.
